SH800S
초보자도 손쉽게 사용할 수 있는 전자동 cell sorter
- 독특한 QR 코드 스캔방식의 sorting chip을 적용
- 네 가지 laser 광원 (405/488/561/638nm)을 선택하여 다양한 활용 가능
- 세가지 크기의 원터치 노즐을 교체 사용하여 오염을 최소화하고 막힘 현상이 없음
전 세계의 실험실에서는 면역학, 후성 유전체학, 발달생물학, 신경과학 및 세포 지도 매핑에 이르기까지 생명과학의 여러 영역에 걸쳐 실험 데이터 품질을 개선하기 위해 Sony SH800 를 선택하고 있습니다. SONY SH800S 는 Disposal Microfluidic chip을 사용하여 nozzle clogging Issue 및 교차오염 없이 모든 사용자가 다양한 세포 유형(미생물, 면역세포, Stemcell, Single cell, Yeast 등)을 쉽게 분류(cell sorting)할 수 있으며, 유세포 분석기(Flow cytometry, FACS)와 다르게 직관적인 소프트웨어는 초보자부터 전문자가까지 모든 연구자가 손쉽게 사용할 수 있도록 합니다. 또한 CART Cell therapy, Cell Therapy, 단백질 생산을 위한 스크리닝 단계에서 활용, 고감도 세포주 선별 단계 등에서 활용되고 있습니다.
Sorting Calibration을 15분 이내로 완료
– 전원을 켜고 flow& laser 안정화, calibration set up 진행까지 단 15분 이내에 완료
Calibration setup 과정 자동화
– Laser alignment, drop delay, side stream setup 등 전체 set up 과정을 완전히 자동화함으로써 operator 없이 모든 연구자가 쉽게 사용 가능
교체가 손쉬운 sorting chip, sample line으로 오염을 최소화
– Sample이 지나는 곳 모두 교체 가능
다양한 Noozle Size : 70, 100, 130 um의 sorting chip을 제공
– 면역세포, 줄기세포, 암 세포주 등 크기가 다른 각각의 시료에 대해 최적화된 조건이 자동으로 설정됨.
분석만 진행 가능
– Analyze mode를 이용해서 sort calibration과정을 skip 가능
Compensation의 자동화와 wizard 기능, cleaning wizard 기능 등을 제공하여 사용자의 편의를 극대화 함
다양한 sample tube(0.5ml, 1.5ml, 5ml, 15ml) 사용 가능
5 ml, 15ml tube, 6 well-384 well plate sorting 가능
A.Normal human blood는 CD3 Alexa Fluor® 488, CD4-PECy7, CD8 Alexa Fluor® 700, CD19 APC, CD16+CD56, PE 및 HLA-DR BV421로 염색. 모든 plot은 림프구에서 gating으로 진행되었음.
B.Regulator T 세포 (CD3+ CD4+ CD25 high CD127-) High-purity sorting.
Sorting and viability analysis
아래 그림은 Isl1Cre-tTomato를 발현하는 생쥐 배아 줄기세포 분화의 분류 및 생존 가능성 실험 결과로 tdTomato (+) purified population을 분석. sorting 후 24시간 세포 배양 진행. (세포배양 결과, 오른쪽 하단 그림)
70µm, 50 kHz, 40 psi, threshold 30,000 events/s의 조건에서 E.coli의 High-speed sorting 진행 시 95% 이상의 purity 보여줌
A.Spherotech® 8 피크 비드를 사용하여 Resolution and Sensitivity 측정, FITC 120 MESF, PE 110 MESF
B.형광 분해능은 PI (propidium iodide) 와 CEN (chicken erythrocyte nuclei)을 사용하여 측정
Optics | Excitation lasers | 488 nm, 405 nm, 638 nm and 561 nm laser |
Output power | 30 mW (max.) optical fiber output | |
Beam alignment | Collinear optical system | |
Detection Parameters | 6 fluorescent + 2 scatter | |
Analog-to-digital converters (ADC) | 8-channel 20-bit, 110MHz | |
Pulse measurement | Height, Area, Width | |
Fluidics | Sample tube | Single, auto-loading tube |
Tube types | 0.5 ml, 1.5 ml, 5 ml and 15 ml tubes | |
Sort Devices | 2-way tube, multiwell plates, PCR tubes, slides | |
Temperature control | 5°C, 37°C (Electric Cooling Method) | |
Agitation unit | Eccentric rotation | |
Magnetic drive | 300 rpm speed | |
Sorting chip size | 70 μm, 100 μm and 130 μm | |
Sort Performance | Event rate | 100,000 eps |
Sorting Speed | Using the 70 μm sorting chip at 50 kHz an average threshold of 12,000 events per second can be achieved with >98% purity and >80% yield. The threshold rate up to 30,000 events per second can be achieved without affecting purity but with a decrease in yield based on Poisson’s statistics. | |
Scatter resolution | 0.5 μm | |
Fluorescence resolution | < 2.5% Half-peak coefficient of variation (HPCV) | |
Fluorescence sensitivity | FITC 120 MESF, PE 110 MESF | |
Ancillary | Dimensions | W: 21.7” (55 cm)x D: 21.7” (55 cm)x H: 28.4” (72 cm) |
Fluidics Cart | W: 30” (78.6 cm) x 20.5 in (52.1 cm) x 22.8 in (58.0 cm) | |
Weight | 216 lb (98 kg) | |
Fluidics Cart | 71 lb (32 kg) (Dry weight) | |
LCD panel | 7-inch, 800 x 480 pixels | |
Power supply | 100-240 V, 50/60 Hz | |
Power consumption | 500 W (max.) | |
Operating temperature | 17.5 to 27.5°C | |
Relative humidity | 20 to 80% | |
Compliance: Environmental Rohs |
Operating System | Microsoft® Windows® 8 Professional, 64 bit |
Data File Structure | Flow Cytometry Standard (FCS) 3.0 or 3.1 | |
Safety Standards Compliance | UL, CE, CSA |
Filter Guide